Interface Dial Connector for Inputs and Outputs

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

When replacing an interface dial connector, match the wires to the cavities listed in the following table.

Fig 1: Identifying Interface Dial Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

INTERFACE DIAL CONNECTOR (5P)

INTERFACE DIAL (5P) CONNECTOR TERMINAL REFERENCE

Cavity

Wire

Connects to

WHT

Navigation unit (JOG BUS)

BRN⁽¹⁾

Navigation unit (JOG SH)

BLK

Ground (G506)

PUR

ACC (interface dial power supply)

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.