Voice Control Switch Test/Replacement
- Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT
).
- Remove the two screws and cover (A) from the steering wheel.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two screws from the audio remote/voice control switch (B).
- Disconnect the 4P connector from the audio remote/voice control switch.
- Measure the resistance between the No. 1 and No. 5 terminals in each switch position according to the table.
RESISTANCE SPECIFICATION
| Position |
Resistance |
| OFF |
About 10 kΩ |
| TALK |
About 2.2 kΩ |
| BACK |
About 630 Ω |
- If the resistance is not as specified, replace the voice control switch.