Cruise Control Main Switch Test/Replacement

Release the clips of the cruise control main switch, and push the cruise control main switch (A) out of the driver's dashboard lower cover.

Fig 1: Pushing Cruise Control Main Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 5P connector (B), then remove the cruise control main switch.
Check for continuity between the terminals in each switch position according to the table. If there is no continuity, replace illumination bulbs (A) or the switch.

Fig 2: Checking For Continuity Between Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.