LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RT >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Lubrication System) >> Oil Pressure Switch Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pressure Switch Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
    Fig 1: Removing Oil Pressure Switch With Torque Specifications
    G04244995Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove any old liquid gasket from the switch and switch mounting hole.
  3. Apply a very small amount of liquid gasket to the oil pressure switch threads, then install the oil pressure switch.
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.
  4. Connect the oil pressure switch connector.
scientia non olet · About LEMON Manuals