LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Output Shaft (Countershaft) Speed Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Output Shaft (Countershaft) Speed Sensor Replacement

  1. Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT ).
  2. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A).
    Fig 1: Output Shaft (Countershaft) Speed Sensor With Torque Specifications
    G05592406Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install a new O-ring (6) on the new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor in the transmission housing.
  4. Check the connector for rust, dirt, or oil, then connect the connector securely.
  5. Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT ).
scientia non olet · About LEMON Manuals