Passenger's Power Window Motor Test

Remove the door panel (see Remove the driver's door panel (see COMPONENT LOCATION INDEX - FRONT DOOR ).
Disconnect the 6P connector (A) from the power window motor.

Fig 1: Identifying Passenger's Power Window Motor 6P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according Fig 2. When the motor stops running, disconnect one lead immediately.

Fig 2: Testing Window Motor By Connecting Battery Power And Ground As Shown
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.