Blower Motor Relay: Testing and Inspection

Power Relay Test

Use this chart to identify the type of relay, then do the test listed for it.

NOTE: For the turn signal/hazard relay input test, refer to Lighting and Horns.






Normally-open type B

Check for continuity between the terminals.

- There should be continuity between the No. 3 and No. 4 terminals when battery positive terminal is connected to the No. 2 terminal, and battery negative terminal is connected to the No. 1 terminal.
- There should be no continuity between the No. 3 and No. 4 terminals when power is disconnected.