October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Transfer Holder Disassembly
- Cut the lock tab on the locknut of the transfer shaft using a chisel.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Put a 14 mm hex wrench (A) in the transfer shaft (B), then secure the hex wrench in a bench vise.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the locknut (A) and the conical spring washer (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the tapered roller bearing (C), the 25 mm thrust shim (D), the transfer collar (E), the transfer drive gear (F), and the transfer shaft (G) from the transfer holder (H).