LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Fit Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Openers >> Hood Release Handle Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Hood Release Handle Replacement

NOTE: Put on gloves to protect your hands.
  1. Remove the driver's kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Remove the bolts, then remove the hood release handle (A).
    Fig 1: Disconnecting Hood Opener Cable From Hood Release Handle
    G05456414
  3. Disconnect the hood opener cable (B) from the hood release handle. Take care not to kink the cable.
  4. Install the hood release handle in the reverse order of removal, and note there items:
    • Make sure the hood opener cable is connected properly.
    • Make sure the hood opens properly.
scientia non olet · About LEMON Manuals