LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> Odyssey EX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Active Control Engine Mount (ACM) System >> Engine Mount Control Unit Replacement >> '08-10 Models J35A7 engine
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

'08-10 Models J35A7 engine

  1. Remove the lower glove box (see LOWER GLOVE BOX REMOVAL/INSTALLATION ), and the right kick panel (see step 2 on TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Disconnect the engine mount control unit 16P connector (A).
    Fig 1: Identifying 16P Connector And Engine Mount Control Unit
    G05522798Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the engine mount control unit (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals