Air Mix Control Motor Replacement
- Remove the audio unit. See AUDIO UNIT REMOVAL/INSTALLATION
.
- Remove the passenger's dashboard lower cover. SeePASSENGER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION
.
- Disconnect the 7P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater unit.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.