LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> S2000 CR >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> IAT Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

IAT Sensor Replacement

  1. Disconnect the IAT sensor 2P connector (A).
    Fig 1: Identifying IAT Sensor 2P Connector
    G06231771Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the clip (B) and the IAT sensor (C).
  3. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals