Mirror Holder Replacement

Mirror Holder Replacement

1. Carefully pull out the bottom edge of the mirror holder (A) by hand. Take care not to scratch the mirror.

2. Separate the mirror holder from the actuator (B) by slowly pulling them apart while separating the adhesive (C), detaching the clips (D), and releasing the hooks (E). Manual mirror: Release the pin (F) from the pin spring (G).

3. Install the mirror holder by engaging the hooks on the actuator. On manual mirrors, insert the pin into the pin spring. Position the mirror holder to line up the clips, then push on the holder until the clips lock into place on the actuator.

4. Check the operation of the actuator.