Calibration - Models With TPMS Switch
- Make sure the tires are inflated to the specified tire pressure listed on the doorjamb label. Vehicle must be stopped with the transmission in neutral (M/T) or P or N (A/T, CVT).
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
- Press the TPMS switch (lower dash, left of steering wheel) for 3 seconds.
- When the calibration successfully begins, the TPMS indicator (instrument cluster, center left) blinks twice.
- Calibration is completed after driving 31 to 62 mph (50 to 100 km/h), steadily without much acceleration or deceleration for about 30 minutes.