Anti-theft Feature

The navigation system and audio-navigation unit have a coded theft protection circuit. Make sure you have the anti-theft security code before:

• Disconnecting the battery.
• Disconnecting the audio-navigation unit connectors A (24P) and C (8P).
• Removing the No. 9 (10 A) fuse from the under-hood fuse/relay box.

After service, reconnect power to the audio-navigation unit, and turn the ignition switch to ON (II). Enter the 4-digit anti-theft security code.

If the code cannot be found, use the interactive Network (iN) to look it up. You can view the serial number in one of the ECU INFO DIAGNOSTIC SCREENS  (see UNIT CHECK (QUICK CHECK)  ). Alternatively, you can find the serial number on the underside label which is located on the audio-navigation unit in the dash.

When replacing the audio-navigation unit, be sure to give the customer the new anti-theft security code.