LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Climate Control) >> Cool Box Control Motor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cool Box Control Motor Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger's dashboard undercover (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
  2. Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
  3. Remove the passenger's air mix control motor (see PASSENGER'S AIR MIX CONTROL MOTOR REPLACEMENT  ).
  4. Release the rod fastener (A), then disconnect the 7P connector B) from the cool box control motor (C).
    Fig 1: Identifying Cool Box Control Motor, Rod Fastener And Connector
    G06968394Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the self-tapping screws and the cool box control motor from the heater unit, then remove the rod (D).
  6. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals