HFL Switch Test

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

SRS Components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

Remove the HFL switch (see HFL SWITCH TEST ).

Fig 1: Identifying HFL Switch Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Measure the resistance between terminals No. 2 and No. 4 in each switch position according to the table.

HFL Switch

HFL SWITCH POSITION AND RESISTANCE CHART

Position	Resistance
No buttons pressed	About 10 kΩ
PICK UP button pressed	About 222 Ω
HANG UP button pressed	About 47 Ω

If the resistance is not as specified, replace the HFL switch (see HFL SWITCH REMOVAL/INSTALLATION ).