Horn Test/Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Disconnect the 1P connector (A) from each horn (B).

Fig 1: Identifying Horn With Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the horn by momentarily connecting battery power to the terminal (A) and grounding the bracket (B). The horn should sound.

Fig 2: Identifying Horn Bracket And Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If it fails to sound, replace it.
Install the horn in the reverse order of removal.