Forced Starting of the Navigation Unit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

SCS Service Connector 07PAZ-001010A

Turn the ignition switch to LOCK (0).
Remove the passenger's cargo side cover (see TRIM REMOVAL/INSTALLATION - CARGO AREA ).
Connect the SCS service connector (A) to the navigation service connector (B) located behind the navigation unit.

Fig 1: Identifying SCS Service Connector And Navigation Service Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the ignition switch to ON (II).
Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Links menu.
NOTE: If the display fails to display the System Links screen, refer to NO PICTURE IS DISPLAYED TROUBLESHOOTING .