Interface Dial Inputs and Outputs for 5P Connector
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
Interface Dial 5P Connector
VOLTAGE SPECIFICATION
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | Not used | Not used | -- | -- | -- | ||
| 2 | PUR | ACC (Accessory) | Power source for interface dial | Battery voltage at ACCESSORY (I) | If open: You can not operate navigation system. If short to ground: Blows fuse No. B18 (7.5 A) in the driver's under-dash fuse/relay box. |
||
| 3 | BLK | GND (Ground) | Ground for interface dial (G502) | 0 V | If open: You can not operate navigation system. If short to ground: You can not operate navigation system. |
||
| 4 | BLK(1) | JOG SH (Shield jog) | Shield for terminal No. 5 | -- | -- | ||
| 5 | WHT | JOG (jog) | Interface dial operation signal | 0-5 V pulses | If open: You can not operate navigation system. If short to ground: You can not operate navigation system. |
||
|
|||||||