Rocker Arm Oil Pressure Sensor Replacement
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the rocker arm oil pressure sensor connector (A), then remove the rocker arm oil pressure sensor (B).
- Remove all the old liquid gasket from the rocker arm oil pressure senor mounting hole.
- Clean and dry the rocker arm oil pressure sensor mounting hole.
- Apply liquid gasket (P/N 08717-0004, 08718-0003, 08718-0004, or 08718-0009) to the rocker arm oil pressure sensor threads. Install the component within 5 minutes of applying the liquid gasket.NOTE:
- Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the rocker arm oil pressure sensor.
- If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply the new liquid gasket.
- Install the new rocker arm oil pressure sensor with a new O-ring (C).
- Connect the rocker arm oil pressure sensor connector.