Brake System Inspection and Test: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the brake system Components listed. Repair or replace any parts that are leaking or damaged.

Component Inspections:

BRAKE SYSTEM TROUBLESHOOTING

Component	Procedure	Also check for
Master Cylinder	Look for damage or signs of fluid leakage at: Reservoir or reservoir grommets. Line joints. Between master cylinder and booster.	Bulging seal at reservoir cap. This is a sign of fluid contamination.
Brake Hoses	Look for damage or signs of fluid leakage at: Line joints and banjo bolt connections. Hoses and lines, also inspect for twisting or damage.	Bulging, twisted, or bent lines.
Caliper	Look for damage or signs of fluid leakage at: Piston seal. Banjo bolt connections. Bleed screw.	Seized or sticking caliper pins.
VSA Modulator-Control Unit	Look for damage or signs of fluid leakage at: Line joints. Modulator-control unit.	-