Check of Telescoping Force

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Set the steering wheel in the straight ahead driving position, and loosen the lock lever fully.
Attach the spring scale (A) to the center point of the steering wheel as shown.

Fig 1: Pulling Spring Scale Attached To Center Point Of Steering Wheel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull the spring scale, and read the force required to move the steering column during telescoping.
Telescoping force:

Standard: 90 N (9.2 kgf, 20.2 lbf) max.
If the measurement is higher than specified, replace the steering column as an assembly (see STEERING COLUMN REMOVAL AND INSTALLATION ).