Steering Gearbox Removal and Installation: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required
- Ball Joint Thread Protector, 12 mm 07AAF-SDAA100
- Ball Joint Remover, 28 mm 07MAC-SL0A202
- Subframe Adapter VSB02C000016*
* Available through the Honda Tool and Equipment Program, 888-424-6857.
Note these items during removal:
- Using clean solvent and a brush, wash any oil and dirt off the valve body unit, it's lines, and the end of the steering gearbox. Blow dry with compressed air.
- Lower the front subframe from the body, and remove the steering gearbox through the gap produced by lowering the front subframe.