Voice Control Switch Test

SRS components are located in this area. Review the SRS COMPONENT LOCATION INDEX .

Also review PRECAUTIONS AND PROCEDURES in the SRS section before doing repairs or service.

1. Remove the voice control switch (see Voice Control Switch Replacement ).
2. Measure the resistance between terminals No. 2 and No. 4 in each switch position according to the table below.
   RESISTANCE SPECIFICATION TABLE
   
   

   Position	Resistance
   No button pressed	About 10 kΩ
   Navigation TALK	About 2.2 kΩ
   Navigation BACK	About 650 Ω

   Fig 1: Measuring Resistance Between Terminals No. 2 & No. 4

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. If the resistance is not as specified, Replace the voice control switch (see Voice Control Switch Replacement )..