Start-Up Procedure and Diagnostic Menu

Start the vehicle, and at the map screen use the navigation unit hard buttons as described:

NOTE: If the map screen does not show, refer to GPS initialization (see SERVICE PRECAUTIONS ).

Press and hold the MAP/GUIDE, MENU, and CANCEL buttons for about 3 seconds. The display screen goes directly to the Select Diagnosis Items menu shown below.

Self-Diagnosis Mode (runs the automatic diagnosis of the navigation system)
Detail Information & Setting (allows you to manually diagnose the navigation system)

Fig 1: Identifying Screen Display - Self-Diagnosis Mode

Courtesy of AMERICAN HONDA MOTOR CO., INC.

From the Select Diagnosis Items menu, select the Self-Diagnosis Mode. The screen changes to the System Links screen, and automatically begins running the self diagnostic. See the System Links section for more information.

Fig 2: Identifying Screen Display - Select Diagnosis Items Menu

Courtesy of AMERICAN HONDA MOTOR CO., INC.