DTC P2413: Exhaust Gas Recirculation (EGR) System Malfunction: General Description

The exhaust gas recirculation (EGR) valve, is controlled by the engine control module (ECM)/powertrain control module (PCM). When the EGR valve is open, exhaust gas flows from the exhaust manifold through the EGR valve, the intake manifold, and the EGR passage. The exhaust gas is circulated into the air/fuel mixture to lower the combustion temperatures, reducing oxides of nitrogen (NOx) emissions. A sensor (lift sensor) is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is stored in the ECM/PCM so that exhaust gas recirculation can be optimized according to driving conditions. Comparing this command value with the lift sensor output signal value, the ECM/PCM controls the EGR valve to make the amount of actual valve lift equal to the command value. If the valve sensor output does not match the commanded valve lift, a malfunction is detected and a DTC is stored.