LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Pilot EX, 3.5 4 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply System >> Fuel Pressure Regulator Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Regulator Replacement

  1. Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL/INSTALLATION  ).
  2. Remove the cover (A).
    Fig 1: Identifying Cover
    G05961443Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bracket (A).
    Fig 2: Identifying Bracket, Clip, Fuel Pressure Regulator & O-Rings
    G05961444Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the clip (B).
  5. Remove the fuel pressure regulator (C).
  6. Install the parts in the reverse order of removal with new O-rings (D). When installing the fuel tank unit, align the marks on the unit and the fuel tank (see INSTALLATION  ).
NOTE:
  • Coat the O-rings with clean engine oil; do not use any other oils or fluids.
  • Do not pinch the O-rings during installation.
  • Use all supplied new parts in the pressure regulator replacement kit.
scientia non olet · About LEMON Manuals