Rear Power Window Switch Test/Replacement

Remove the rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION .
Remove the screws and disconnect the connector (A) from the rear power window switch (B), them remove the switch assembly from the door panel.

Fig 1: Identifying Rear Power Window Switch With Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the three screws and the rear power window switch (A).

Fig 2: Identifying Rear Power Window Switch With Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Swap the rear power window switch with an other known-good rear power window switch and test. If the original power window switch is faulty; replace it.
Install the switch in the reverse order of removal.