September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Throttle Position Learning Check
- Connect the HDS to the data link connector (DLC) (A) located behind under the driver's side of the front console.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Turn the ignition switch ON (II).
- Make sure the HDS communicates with the vehicle and the ECM. If it doesn't, go to DLC CIRCUIT TROUBLESHOOTING
.
- Select the INSPECTION MENU with the HDS.
- Do the TP LEARNING CHECK in the ETCS TEST. If needed, clean the throttle body (see THROTTLE BODY CLEANING
).