'00-03 Models: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Honda S2000, 2004 Honda S2000, 2003 Honda S2000, 2002 Honda S2000, and 2001 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Pull up the lock (A) of the ABS modulator-control unit 25P connector (B), then disconnect the connector.

Fig 1: Removal/Installation Of ABS Modulator Control Unit (00-03 Models) With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the six brake lines from the ABS modulator-control unit (C).
Remove the two 6 mm nuts.
Remove the ABS modulator-control unit.