Spark Plug: Service and Repair

Ignition Coil and Spark Plug Removal/Installation

1. Remove the ignition coil cover (A).

K24Z1 engine





K24Z6 engine





2. Disconnect the ignition coil connectors (B), then remove the ignition coils (C).

3. Remove the spark plugs and inspect them Testing and Inspection.

4. Apply a small amount of anti-seize compound to the plug threads, and screw the plugs into the cylinder head, finger-tight, then tighten the specified torque.





5. Install the ignition coils in the reverse order of removal.