Audio Display Visor Removal/Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Do this procedure in a clean place free from dirt.
Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).
When removing the audio display visor, do not touch the LCD facing.
If there is dirt on the LCD facing, clean it using compressed air.
When installing the audio display visor onto the LCD assembly, be careful not to touch the LCD facing.
Check that the audio display visor and the LCD assembly are properly installed.
Since the LCD assembly and the audio display visor are installed at an angle, be sure that the screws are properly seated. If not properly seated, tighten the screws.
Check that the audio display unit assembly has no damage.
When removing the audio display visor, do not hold the LCD facing down.

Remove the audio display-USB adapter control unit (see AUDIO DISPLAY-USB ADAPTER CONTROL UNIT REMOVAL/INSTALLATION ).
Remove the screws and the LCD assembly (A) from the audio display visor (B).

Fig 1: Locating LCD Assembly And Audio Display Visor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio display visor reverse order of removal.