Audio unit disc indicator does not work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Check the vehicle battery condition first (see BATTERY TEST ).
Discs with labels should not be used in the audio-navigation unit or audio unit. They may jam and damage the player mechanism.

Turn the ignition switch to ON (II).
Turn on the audio system.
Insert a known-good disc or press the EJECT button.
Is the disc indicator (LED) indicated?

YES -Intermittent failure. The audio-navigation unit or audio unit is OK at this time. Check for loose or poor connections at audio-navigation unit or audio unit and audio-navigation switch panel or audio switch panel.

NO -
- With navigation: Check the pin fits between audio-navigation switch panel and the audio-navigation unit. If OK, substitute a known-good audio-navigation switch panel (see AUDIO-NAVIGATION SWITCH PANEL REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio-navigation switch panel (see AUDIO-NAVIGATION SWITCH PANEL REMOVAL/INSTALLATION ). If the symptom/indication is still present, replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
- Without navigation: Check the pin fits between audio switch panel and the audio unit. If OK, Substitute a known-good audio switch panel (see AUDIO-NAVIGATION SWITCH PANEL REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio switch panel (see AUDIO-NAVIGATION SWITCH PANEL REMOVAL/INSTALLATION ). If the symptom/indication is still present, replace the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).