Headlight Leveling Motor Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

For the right side, move the radiator reservoir.
Disconnect the 3P connector (A) from the headlight leveling motor, then turn the leveling motor (B) 45° counterclockwise (left side) or clockwise (right side) to remove it.

Fig 1: View Of Turning Leveling Motor 45° Counterclockwise (Left Side) Or Clockwise
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the headlight high beam bulb and pull the headlight reflector slightly, then remove the headlight leveling motor.
Install the headlight leveling motor in the reverse order of removal.
After installing, do the headlight initial position learning (see HEADLIGHT INITIAL POSITION LEARNING PROCEDURE ).