LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Element SC, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 3rd Clutch Transmission Fluid Pressure Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A) and the sealing washer (B).
    Fig 1: 3rd Clutch Transmission Fluid Pressure Switch And Sealing Washer With Torque Specifications
    G06266904Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer, and tighten the 3rd clutch transmission fluid pressure switch to the specified torque by turning the metal part, not the plastic part.
  3. Check the connector for rust, dirt, or oil, and clean or repair if necessary. Then connect the connector securely.
scientia non olet · About LEMON Manuals