LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Steering System) >> Power Assist Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Assist Check

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test should be done with original equipment tires and wheels at the correct tire pressure.
  1. Check the power steering fluid level (see FLUID CHECK/REPLACEMENT  ).
  2. Start the engine, let it idle, and turn the steering wheel from lock to lock several times to warm up the fluid.
  3. Attach a commercially available spring scale (A) to the steering wheel. With the engine idling and the vehicle on a clean, dry floor, pull the scale as shown and read it as soon as the tires begin to turn.
    • If the scale reads no more than the specification, the steering gearbox and pump are OK.
    • If the scale reads more than the specification, troubleshoot the steering system (see HARD STEERING  ).

      Initial turning load: 29 N (3.0 kgf, 6.6 lbf) 

      Fig 1: Checking Steering Initial Turning Load Using Spring Scale
      G06970460Courtesy of AMERICAN HONDA MOTOR CO., INC.