LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2011 >> CR-V SE, 2.4 RE4, MZHA >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor Replacement

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the knock sensor connector (A).
    Fig 1: Lnock Sensor Connector And Knock Sensor With Torque Specification
    G06610411
  3. Remove the knock sensor (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals