With Navigation

The audio-navigation unit has a coded theft protection circuit. Make sure you have the anti-theft security code before:

• Disconnecting the 12 volt battery.
• Disconnecting audio-navigation unit connector A (24P) and C (8P).
• Removing the No. 1 (15 A) fuse from the under-dash fuse/relay box.

When the audio-navigation unit is reconnected to the power and the ignition switch is turned to ON (II), "CODE" will be displayed. Then, enter the 4-digit anti-theft security code.

When replacing the audio-navigation unit, be sure to give the customer the new anti-theft security code.