Engine Electrical
ENGINE ELECTRICAL SPECIFICATION
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Ignition coil | Rated voltage | 12V | ||
| Firing order | 1-3-4-2 | |||
| Spark plug | Type | NGK:DILFR6F11G | ||
| Gap | 1.0-1.1 mm (0.039-0.043 in) | - | ||
| Ignition timing | At idle Check the red mark | In N or P | 10±2°BTDC | |
| Drive belt | Tension | Auto-tensioner | ||
| Starter | Output | 1.0 kW | ||
| Commutator mica depth | 0 40-0.50 mm (0.016-0.020 in) | 015 mm (0.006 in) | ||
| Commutator runout | 0.02 mm (0.001 in) max. | 0.05 mm (0.002 in) | ||
| Commutator O.D. | 28.0-28.1 mm (1.102-1.106 in) | 27.5 mm (1.083 in) | ||
| Brush length | 11.1-11.5 mm (0.44-0.45 in) | 4.3 mm (0.17 in) | ||