LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2011 >> Insight Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Block >> Connecting Rod Bolt Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Connecting Rod Bolt Inspection

  1. Measure the diameter of each connecting rod bolt at point A and point B with a micrometer.
    Fig 1: Measuring Diameter Of Connecting Rod Bolt
    G06429012Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Calculate the difference in diameter between point A and point B.

    Point A-Point B = Difference in Diameter 

    Difference in Diameter: 

    Specification: 0-0.05 mm (0-0.002 in) 

  3. If the difference in diameter is out of tolerance, replace the connecting rod bolt.
scientia non olet · About LEMON Manuals