October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Back Power Window Position Switch Test
- Remove the rear panel trim (see REAR PANEL INSULATOR REPLACEMENT
).
- Disconnect the 2P connector (A) from the back power window position switch (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the terminals in each back power window position according to the table.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the continuity is not as specified, replace the switch.
- Install the switch in the reverse order of removal.