Description & Operation: Notes
NOTE:
When a tire pressure sensor or control unit is replaced, or a known good wheel is substituted, the ID(s) of all four tires' sensors must be memorized by the TPMS control unit. After memorizing the sensor ID(s) or doing a tire rotation, the mounting location of sensors 1, 2, 3 and 4 must be determined. See RESET PROCEDURES .
NOTE:
The Honda Diagnostic System (HDS) or an OBD-II compatible scan tool and an ATEQ VT55 tool (mandatory for the Crosstour), or the TPMS sensor tool AKS0620006 must be used to program information into new TPMS control unit. The TPMS Sensor Tool (AKS0620006) has been superceded by the ATEQ VT55 tool, and is recommended for use on all Honda vehicles. However, for the Accord Crosstour, only use the ATEQ VT55 for all TPMS related procedures.