Shift Lock Solenoid Test
WARNING: This page is about a different variant/trim than selected.
- Connect the HDS to the DLC (A) located under the driver's side of the dashboard.
- Turn the ignition switch to ON (II).
- Make sure the HDS communicates with the PCM. If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING ).
- Select the Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
- Make sure that the shift lever can be moved out of P when Shift Lock Solenoid : ON. Move the shift lever back in P, and make sure it locks with Shift Lock Solenoid: OFF.
- Make sure that the shift lock releases when the shift lock release is pushed, and make sure it locks when the shift lock release is released.
- If shift lock solenoid does not work properly, troubleshoot shift lock system (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING ).