LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> CR-Z Base, Standard Trans >> Repair and Diagnosis >> Steering >> Power Steering >> EPS System >> General Troubleshooting Information >> How to Retrieve DTCs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Retrieve DTCs

  1. With the ignition switch in LOCK (0), connect the HDS to the data link connector (DLC) under the driver's side of the dashboard.
  2. Turn the ignition switch to ON (II).
  3. Make sure the HDS communicates with the vehicle and the EPS control unit. If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING ).
  4. Follow the prompts on the HDS to display the DTC(s) on the screen. After determining the DTC, refer to the DTC TROUBLESHOOTING . Do the all systems DTC check, and troubleshoot any powertrain DTCs first.
  5. Turn the ignition switch to LOCK (0).
scientia non olet · About LEMON Manuals