Power Assist Check

NOTE: This test should be done with original equipment tires and wheels at the correct tire pressure.

Start the engine, and let it idle
Attach a commercially available spring scale to the steering wheel. With the engine idling and the vehicle on a clean, dry floor, pull the scale as shown, and read it as soon as tie tires begin to turn.
Initial turning load: 29 N (3.0 kgf, 6.6 lbf)

Fig 1: Attaching Spring Scale
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the scale reads no more than 29 N (3.0 kgf, 6.6 lbf), the power assist is OK. If it reads more, check these items:
- See STEERING LINKAGE AND GEARBOX INSPECTION
- See RACK GUIDE ADJUSTMENT
- See EPS INDICATOR