October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
VSA Modulator-Control Unit Removal and Installation: Removal
- Turn the ignition switch to LOCK (0).
- Remove the washer reservoir WASHER RESERVOIR REPLACEMENT
- Disconnect the VSA modulator-control unit 36P connector (A) by pushing the lock (B) and pulling down the lever (C); the connector disconnects itself.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Disconnect the six brake lines from the VSA modulator-control unit.
NOTE:
Brake lines are connected to the master cylinder (D) and to the left-rear (E), the right-front (F), the left-front (G), and the right-rear (H) brake systems.
- Remove the VSA modulator-control unit (I) with the bracket (J) from the body.
- Remove the VSA modulator-control unit from the bracket.