Navigation Display Stays On With Ignition Switch in LOCK (0)
WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check for aftermarket accessories that may interfere with the navigation system.
- Check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have anti-theft code for the navigation system.
- After troubleshooting, enter the anti-theft code for the navigation system.
- The vehicle may have been used for a show event. Check for a short jumper harness in-line with the audio-navigation unit connector A. If a jumper harness is present, remove it, and return it to Tech Line.
- Remove the key from the ignition.
Does the navigation screen stay on?
YES - Go to step 2.
NO - The system is OK at this time.
- Check for battery voltage on audio-navigation unit connector A (24P) terminal No. 14.
Is there battery voltage?
YES - Troubleshoot a short to battery voltage on the ACC circuit.
NO - Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).