Heater-A/C Control Panel Removal/Installation

Remove the center panel:
- With navigation system (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )
- Without navigation system (see GROUND TO COMPONENTS INDEX )
Remove the control cables from the blower/heater unit (see MODE CONTROL CABLE REMOVAL/ INSTALLATION ).
Pull out the right portion of the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the screw, and pull out the heater-A/C control panel (A) to access the electrical connectors.

Fig 1: Identifying Heater-A/C Control Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors, and remove the heater-A/C control panel along with the control cables.
Install the control panel in the reverse order of removal. After installation, operate the controls to make sure they work properly.