With navigation
- Remove the driver's airbag assembly DRIVER'S AIRBAG REPLACEMENT
- Disconnect the cable reel 20P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Measure the resistance between terminals No. 3 and No. 6 in each switch position according to the table.
| Position |
Resistance |
| No button pressed |
About 10 kΩ |
| MODE |
About 3.7 kΩ |
| CH(+) |
About 1.7 kΩ |
| CH(-) |
About 775 Ω |
| (VOL. UP)↑ |
About 357 Ω |
| (VOL. DOWN)↓ |
About 100Ω |
- If the resistance is not as specified, replace the audio remote switch (see AUDIO REMOTE SWITCH REPLACEMENT
).